Payment & Shipping Terms:
|Apperance:||Pale Yellow To Colorless Transparent Liquid||Temperature:||110°C ~120°C|
|PH Value:||4.0-4.5(after Diluted)||Solid Content:||50%|
|Classification:||Chemical Auxiliary Agent||Properties:||Easily Dissolve In Warm Or Cold Water|
chemicals used in textile industry,
textile dyeing chemicals
Formaldehyde-Free bleachable resin finishing Agent to improve tensile force
Formaldehyde-free bleachable resin LT-371
Wrinkling/ color fixing process
☆ Dosage and PH value: diluting resin with water----Before adding water, the PH value is about 4.0. Based on resin: water = 1:6, and the solid content measured by sugar meter is 7 degrees, the PH value changes into 4.0-4.5 after diluting.
|Can be used in low temperature at 110°C ~120°C|
|Good color fixation and hand feel, also can increase the fluffy effect|
|Can arrange monkey wash directly after finishing the resin, also can be bleached and dyed|
|Improve the quality of the whole pants|
☆ Pale yellow to colorless transparent liquid (Along with the extension of storage time, the color will deepen gradually, which is a normal phenomenon and does not affect the usage)
Solid content: 50%
☆ No need to add catalyst
☆ The resin dilution process needs to be stirred evenly.
☆ The oven temperature should be stable and the clothes should be evenly heated.
☆ The temperature, time and dosage should be matched reasonably with the cloth. Otherwise, the effect will be not enough if the amount is insufficient, and the tearing force will be obviously reduced if the amount is excessive. Recommended usage:
Dosage: 15% (resin: water = 1:6), without or with proper addition of hardener, the dosage of fixation process can be as low as 10%
Temperature: 120-130°C Time: 20 minutes
☆ Normally, the PH value of the newly diluted liquid is between 4.0-4.5, after continuously recycled, the PH value will rise. For the clothes that have not been desized, the alkalinity is strong, it is necessary to pay attention to the PH value change of the liquid. If the PH value rises to above 7.0, it will obviously affect its usage. You can add a little citric acid to adjust the PH value, but make sure that the pH value cannot be adjusted too low. If the PH value is below 4.5, the resin will react too fast, which will affect the tensile force of the pants.
Storage & Packing:
Shelf time: Six months when store in cool, dry and shaded warehouse
Packing: 140KG/plastic drum
Compatibility of other auxiliaries and process need to be checked before application
Contact Person: Carol zhang