Payment & Shipping Terms:
|Clear To Slightly Cloudy Fluid
Approx 0.3 Amino Functional Silicone Fluid,
Fabrics Amino Functional Silicone Fluid,
Knitwear Amino Silicone Oil
WACKER Amino Silicone Oil Functional Silicone Fluid Smooth Feel WR1300 CN For Cotton Fabrics And Knitware
WACKER ® FINISH WR 1300 CN is a reactive aminoethyl/aminopropyl-functional polydimethylsiloxane.
WACKER ® FINISH WR 1300 CN is particularly suitable as an active substance in softener formulations for the impregnation of fibers and textiles. WACKER ® FINISH WR 1300 CN imparts a very soft, drapable, and elastic handle to woven and knitted fabrics. WACKER ® FINISH WR 1300 CN is considered to be the best softening agent for cotton fabrics and knitware made of cotton or cotton/PES blends . WACKER ® FINISH WR 1300 CN improves the wash- and-wear properties and the crease recovery angle, sewability and tear strength and reduces abrasion loss. The effects are fast to washing and dry cleaning.
WACKER ® FINISH WR 1300 CN has very little effect on the degree of whiteness in a softener formulation under usual application conditions. As a rule, no adverse effect on the shade or colour fastness of coloured goods is observed.
As a component of formulations for finishing fibrefill. WACKER ® FINISH WR 1300 CN imparts excellent slickness and resilience to the fibre.
WACKER ® FINISH WR 1300 CN can be applied neat, from solution, or emulsion. Suitable solvents are aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, ethers, esters, higher alcohols, and ketones.
Most textile processes are water-based. Hence WACKER ® FINISH WR 1300 CN is mainly applied from emulsion. WACKER ® FINISH WR 1300 CN is highly suitable for the formulation of microemulsions and macroemulsions.
WACKER ® FINISH WR 1300 CN can be used as sole active substance in softener emulsions or in combination with other components,e.g.paraffines, esters of fatty acids, etc. Compatibility of the components should be checked in each individual case.
EMULSIFIER 1300 and STABILIZER 1300 allow a stable microemulsion based on WACKER ® FINISH WR 1300 CN to be prepared with the minimum of shear force.
Emulsions of WACKER ® FINISH WR 1300 CN are diluted to the optimum concentration for the specific fabric. They are applied by padding or exhaustion.
WACKER ® FINISH WR 1100 CN
|clear to slightly cloudy fluid
|[mPa s] ]
|ml 1N HCl/g
These figures are only intended as a guide and should not be used in preparing specifications.
WACKER ® FINISH WR 1300 CN has a shelf life of at least 6 months. if stored in tightly closed original containers at 25 °C. The "Best use before end" date of each lot is shown on the product label.
If the material is kept beyond the shelf life recommended on the product label, it is not necessarily unusable, but a quality control should be performed on the properties relevant to the application.
Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from Wacker subsidiaries.
Contact Person: Mary