Silicone Hydrophilic Softener For Textiles Towel T1501 Amino

Hydrophilic Amino Silicone Oil ® T1501 For Towel T1501

® T1501 is a super hydrophilic modified amino silicone oil modified with specialty polyethers and quaternary ammonium salts, specially designed
Provide instant hydrophilic properties and outstanding softness and smoothness for all kinds of cotton fabrics

® T1501 can be used for:
 Soft and smooth processing of various knitted cotton fabrics;
 Soft, smooth and fluffy treatment of various towels and other fabrics;
 Soft and smooth processing of various woven cottons;

Advantage:

® T1501 has the following properties:
 Instantly hydrophilic;
 Gives super soft, fluffy plumpness to the fabric;
 Does not contain harsh volatile solvents and is environmentally friendly;
 No yellowing;
 No oil floating, no silicon spots, no sticking to rollers;
 Acid and alkali resistance, high temperature resistance, high shear resistance;
 Does not contain unfriendly chemical components such as alkyl phenols;
 Suitable for dipping, padding and spraying processes;

Appearance…………………………………………………………Colorless Transparent to slightly yellowish liquid
Dynamic Viscosity, mPa.s (25℃), Approx.……………………………………………………5000
Ammonia value, mmol/100g, about…………………………………………………………………… 0.6
Ionicity………………………………………………………………………………Weak cationic

Typical Microemulsion Formulation
Element

 ® T1501 ………………………………………………………… 20%
 Glacial acetic acid……………………………………………………………………………… 0.5%
 Surfactant C 13 (EO) 6 ……………………………………………… 10%
 Preservatives……………………………………………………………………………… 0.1%
 Deionized water ………………………………………………………………………………69.4%

 Mix together the polyether-modified aminosilicone ® T1501, glacial acetic acid and surfactant, stir well
uniform;
 Slowly add deionized water, and continuously stir to emulsify until the emulsion becomes uniform and transparent in appearance after the water is added, and finally add the preservative. The emulsion is filtered to remove impurities or undissolved oils.

Low emulsifier typical emulsion formulation
Element
 ® T1501 ……………………………………………………………… 24%
 Glacial acetic acid……………………………………………………………………………… 0.3%
 Surfactant C 13 (EO) 10 ………………………………………………………… 6%
 Part 1 Deionized water………………………………………………………… 8%
 Part II Deionized water ……………………………………………………………… 20%
 Remaining deionized water................................................Top up to 100%

Padding process:

1). Add T1501, emulsifier and glacial acetic acid into the beaker, stir evenly, slowly add the first part of deionized water,
until the mixture becomes a clear liquid;
2). Slowly add the second and third parts of deionized water, dilute, filter, and finish.
2. Padding method (24% active content emulsion)
For the padding process, it is recommended to use 20g/L-40g/L, padding at room temperature, and drying at 100-130℃;
3. Impregnation method (24% active content emulsion)
For the impregnation process, 2-4% of ® T1501 at 24% active content based on fabric weight is recommended
Emulsion; Immersion time: 20-30min; Water temperature 45-55℃.

Storage & Packing:

Store in a cool, ventilated and dry warehouse, away from fire and heat sources, and prohibit sunlight exposure or freezing. The lighting, ventilation and other facilities in the warehouse should use explosion-proof products, which should be stored in original airtight containers under the conditions of +5℃-+30℃.
The standard validity period for ® T1501 is 12 months from the date of manufacture (expiration date). The packaging is required to be sealed and should be stored separately from oxidants, acids, alkalis and edible chemical raw materials. Please refer to the storage advice and expiration date on the packaging. Light loading and unloading during handling to prevent damage to packaging and containers. Transport as non-dangerous goods. After this date, Bluestar Silicones will no longer guarantee that the product meets the sales target.

200L polyethylene plastic drums